Guide
Why does my power keep tripping? Common electrical faults explained
What usually causes tripping, flickering and dead power points, and what you can safely check yourself.
What a trip is telling you
When a safety switch or breaker trips, it is doing its job: it has detected a fault or an overload and cut the power. The common causes are a faulty appliance, too many appliances on one circuit, moisture in an outdoor fitting or power point, and damaged or deteriorated wiring. A switch that trips again as soon as it is reset is pointing to a fault that is still there.
What you can safely check
Unplug everything on the affected circuit, reset the switch, then plug appliances back in one at a time. If one of them trips the power, that appliance is the likely cause and should not be used. Note what was running when it tripped and whether it has rained recently. Do not open the switchboard beyond the cover, and never tape or wedge a switch on.
When to call an electrician straight away
Call immediately for a burning smell, a switch or power point that is hot or discoloured, buzzing from the switchboard, sparks, or a tingle from a tap or appliance. Turn the power off at the main switch if it is safe to reach. These are signs of a fault that can start a fire or cause a shock, and they should not wait until it is convenient.